On the ground of levelling compaction, the main force direction (longitudinal) of the installed grille should be perpendicular to the direction of the embankment axis, laying to be flat, no wrinkles, as close as possible, with the nail and earth stone pressure to fasten, laying the main force direction of the grid is the best long without joints, the connection between amplitude and amplitude can be manually binding, lap width is not less than 10cm. If the grid is set above two layers, the seam should be staggered between layers, large area after laying, to adjust the overall flatness, when filling the cover of a layer of soil, before rolling, should again use manual or machine tensioning grid, the strength should be evenly, so that the grid in the soil for the tension and force state.
Method Of Laying Geogrid
Jiangsu Hanovo New Material Co.,Ltd | Updated: Jul 13, 2017
Previous: Fiberglass Introduction
Next: One-way Geogrid Main Use
Related News
- How To Prevent Aging By Composite G...
- Geotextile Detail
- Guide For Application Of Plastic Ge...
- The Laying Of HDPE Membrane
- Application Of Steel And Plastic Ge...
- The Main Points Of Geotechnical Gri...
- One-way Geogrid Main Use
- Fiberglass Introduction
- Mechanism Of Geomembrane
- Geosynthetics Synthetic Materials
- Geocomposite In Embankments On Soft...
- Basalt Fiber Mesh Used In New And O...
- Fiberglass Grid Laying And Fixed
- RTM Molding Process And Classification
- The Type Of RTM
- RTM Molding Process Characteristics
- Glass Grating Principle Of Introduc...